FAQ

Frequently Asked Questions

What is the average cost to seal pavers in Florida?

Prices posted by First Coast companies run about $1.75 to $3.25 per square foot for a clean, sand and seal. For a 1,000 square foot driveway, that comes to roughly $1,750 to $3,250. Stripping an old coat that has failed adds to the total. To price your own driveway, ask for a free estimate.

How often do you need to reseal pavers in Florida?

Most homes need a new coat every two to five years. Stallone's Pro Wash gives that span for Northeast Florida, and Safe Touch says full sun, pool chlorine and storms can pull it toward two. Water that soaks in instead of beading is the sign to call. To have your pavers checked, call (904) 569-9619.

Is it good to seal pavers in Florida?

Yes, when the color has faded, the joints are running low on sand or green growth keeps coming back. A coat helps hold the sand through summer storms and makes the surface easier to rinse. The catch is a repeat job every few years. To see whether yours are ready, ask for a free estimate.

How much should I pay for paver sealing?

A fair quote usually sits inside the $1.75 to $3.25 per square foot range that Safe Touch publishes for the First Coast. Ask what the price covers, since one number may include joint sand and stripping while another leaves them out. To get a quote you can compare with that range, ask for a free estimate.

Do large Dinsmore lots cost more to seal?

The price follows the square footage of pavers, not the size of the lot. A long driveway or a wide patio simply adds feet to the bill. A 1,500 square foot area comes to about $2,625 to $4,875 at the published range. To measure yours, call (904) 569-9619.

How long does a sealing job take?

Most homes take one to two days. Safe Touch calls pavers with empty joints or a failed coat a two day restoration, because the surface has to dry between the wash and the sealer. Rain can move the second day. For a schedule that matches your surface, phone (904) 569-9619.

Why is paver sealing so expensive?

The bulk of what you pay goes to preparation, with the sealer itself a smaller share. A full job means washing, treating stains, refilling joints, waiting for the pavers to dry and then applying the coat. Safe Touch says empty joints or a failed coat turn it into a two day restoration, and failed sealer has to be stripped first.

How long do paver sealers last?

Two to five years in Northeast Florida, according to Stallone's Pro Wash, depending on sun, traffic and prep. Safe Touch calls two to three years typical. Sunny driveways and pool decks land at the short end of that range, while shaded walks reach the long end.